Sliding Table Saw
TS-P3200 |
 TS-P3200
|
| Features Include: |
- Automatic digital control for saw blade height and tilting angle.
- Heavy-duty construction, vibration free operation. Easy to set up and quick to adjust.
- Saw blade moves up or down using an electric motor.
- Scoring blade provides clean accurate chip free cutting, suitable for edgebanding.
- Tilting of saw blade from 0 to 45 degrees is done by an automatic digital controller.
- Saw shaft bearings are lubricated for life and are supported with anti vibration and noise cushions.
- Special primers and finishes are used for long term durability.
- A special desiged double roller carriage for the sliding table and wear resistant surface allow for free movement and higher accuracy.
- Stable, torsion-free cross slides allow for easy movement of the swinging arm.
- When the support table is assembled with the carriage, there is a ledge that allows for parallel cuts.
- When the table is assembled with the sliding carriage, both the table and sliding carriage system will be rigid and work smoothly.
- Telescoping rip fence stop extends to 10 feet and tilts from 0 to 45 degrees.
|
| |
|
SPECIFICATIONS
|
TS-P3200
|
|
Sliding Carriage Dimensions
|
126" X 15.5"
|
|
Max. Saw Blade Cutting Length
|
122"
|
|
Max. Width Between Blade & Fence
|
51"
|
|
Saw Blade Tilting (Automatic)
|
0 ~ 45 Degree
|
|
Max. Depth Of Cut 0 ~ 15.75 Degree
|
4.7"
|
|
Max. Depth of Cut 15.75 ~ 45 Degree
|
3.1"
|
|
Ma. Main Saw Blade Dia.
|
400 MM (14")
|
|
Saw Blade Shaft Dia.
|
30 MM
|
|
Main Saw Blade Speed (RPM)
|
3000,4000,5000
|
|
Main Saw Blade Motor
|
9 HP
|
|
Scoring Blade Dia.
|
125 MM (5")
|
|
Scoring Blade Shaft Dia
|
20 MM
|
|
Scoring Blade Speed (RPM)
|
8500
|
|
Scoring Blade Motor
|
1 HP
|
|
Saw Blade Move Up & Down ,Tilting Motor
|
1/8 HP
|
|
Power
|
220V 3PH
|
|
Machine Dimension
|
134" x 130" x 39"
|
|
N. W.
|
2453 LBS
|
|
|
|
|
|
|
Add To Proposal: Adds the above product to a proposal list.
Request Proposal: Compiles all products that were "Add to Proposal" and sends user to a "Request Information" form.
|
